Hydraulic hybrid retrofit for refuse trucks

Jan. 22, 2010
A new hydraulic hybrid retrofit kit specifically designed for refuse collection trucks can deliver up to 30% better fuel economy while increasing brake life and improving productivity, according to the developer Eaton Corp

A new hydraulic hybrid retrofit kit specifically designed for refuse collection trucks can deliver up to 30% better fuel economy while increasing brake life and improving productivity, according to the developer Eaton Corp.

The Hydraulic Launch Assist (HLA) hybrid system will be available for installation in Mack LE, MR and Granit chassis later this year, with kits for other makes and models to follow, according to Robert Golin, business development manager for Eaton’s Hybrid Power Systems.

The retrofit is a parallel hybrid system that sits between the transmission and rear axle. It uses the momentum of the truck to compress hydraulic fluid when slowing the vehicle and then releases the stored energy in the fluid to help the truck accelerate on takeoff. It is especially well suited for applications with frequent stops and starts such as refuse collection trucks.

“A Class 8 automated side loader is a great application for HLA because it can make 1,400 stops in a day,” said Golin. It is also simpler than a diesel electric hybrid system and at 1,200 lbs. weighs less than half as much, he said. Diesel electric systems make sense for applications with less stop and go, but “Why have the cost and complexity (of a diesel electric system) when HLA gives you what you need in a refuse truck?” Golin asks.

The Eaton HLA has two operating modes that can be set by the fleet. The first provides maximum fuel economy, using only the stored kinetic energy in the hydraulic fluid to start the truck moving from a stop. That initial boost can be up to 180 hp and can accelerate a stop refuse truck up to 12 MPH in fouor to six seconds, according to Golin.

The second operating mode provides maximum productivity, combine the diesel engine’s power with the HLA’s to increase acceleration by 16 to 22% and deliver an overall 10% improvement in productivity. “That means a truck can handle more bins in a day, and more bins mean more revenue," said Golin.

Installed in a 2- or 3-yr. old chassis, the Eaton HLA should offer refuse fleets a 3-yr. payback, according to Golin. By taking over much of the vehicle’s braking, it will extend the life of service brakes by four to five times, eliminating up to four brake jobs a year at $1,800 to $2,000 a piece, he estimates. Fuel savings from using the power stored on braking should save another $3,000 to $4,000 a year, and additional productivity gains should boost yearly savings from the HLA system to about $15,000, Golin said.

The first Eaton HLA retrofit kits are intended for Mack LE, MR and Granite chassis with Allison automatic transmissions, a common combination for side-loader refuse collection trucks. They will installed by a network of service providers trained and certified by Eaton, who will also provide service and warranty support, Golin explained. Eaton expects to begin delivering the kits to the first certified installers “in the next couple of months,” he said.

Designed for a 10-yr. life and tested up to 3.3 million operating cycles, the HLA hydraulics are self-contained and completely separate from the refuse packer’s hydraulic system. “Our system is also completely fuel agnostic, so it can even work with CNG-powered trucks to help them regain some of the power lost (with that fuel),” Golin says.

About the Author

Jim Mele

Nationally recognized journalist, author and editor, Jim Mele joined Fleet Owner in 1986 with over a dozen years’ experience covering transportation as a newspaper reporter and magazine staff writer. Fleet Owner Magazine has won over 45 national editorial awards since his appointment as editor-in-chief in 1999.

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!

Sponsored Recommendations

Leveraging telematics to get the most from insurance

Fleet owners are quickly adopting telematics as part of their risk mitigation strategy. Here’s why.

Reliable EV Charging Solution for Last-Mile Delivery Fleets

Selecting the right EV charging infrastructure and the right partner to best solve your needs are critical. Learn which solution PepsiCo is choosing to power their fleet and help...

Overcoming Common Roadblocks Associated with Fleet Electrification at Scale

Fleets in the United States, are increasingly transitioning from internal combustion engine vehicles to electric vehicles. While this shift presents challenges, there are strategies...

Report: The 2024 State of Heavy-Duty Repair

From capitalizing on the latest revenue trends to implementing strategic financial planning—this report serves as a roadmap for navigating the challenges and opportunities of ...