Dana to expand Diamond driveshaft line

Feb. 21, 2012

TAMPA, FL. Dana Holding Corp. plans to expand its one-piece aluminum Diamond series driveshaft product line, which it introduced last year: offering driveshafts up to 130 in. in length versus the previous 106-in. limit.

Steve Slesinski, Dana’s director of global product planning, noted during a press conference here at the 2012 Technology & Maintenance Council annual meeting that the expansion is necessary in part to deal with the increasing “regionalization” of truck operations in the U.S.

“In the past, fleets would ‘overspec’ all manner of truck components because they operated from coast-to-coast under many different conditions, such as moving from the flat plains to the steep grades of the Rocky mountains, negotiating varying speed limits from 55 mph to 75 mph and above along the way,” Slesinski told Fleet Owner.

“Now, fleets are trying to ‘tune’ their trucks to more specific applications to maximize fuel economy and productivity,” he said. “So while there have always been many different specs available in the past, regionalization is only going to increase the needs for different spec packages.”

Slesinski said the major market drivers in trucking today revolve around fuel efficiency, emissions control, and cost of ownership, as well as the above-mentioned impact of regionalization.

As a result, Dana believes its new extended one-piece aluminum Diamond driveshaft will help in several of those areas, as it weighs 100 lbs. less than a comparable two-piece steel driveshaft, and will be applicable to a wider set of trucks as 60% of all Class 7 and 8 trucks operating across North America use driveshfts measuring between 90 and 139 in. in length.

“The one-piece design also helps reduce part count and maintenance complexity, plus eliminates the start-up ‘shudder’ many trucks experience as well,” Slesinski said. “We also believe there’s a slice of the market that will spec it simply because of the aluminum finish.”

On a separate topic, Slesinski noted that Dana plans to have a complete service support network set up and in place to go “live” July 1 to replace the dissolution of the Roadranger network forged by Dana and Eaton 14 years ago.

“We just want to stress that warranty coverage and service support is going to remain the same – only the contact phone number will change,” he stressed. “Both Eaton and Dana want to make this transition as seamless for all of our customers as possible.”

About the Author

Sean Kilcarr | Editor in Chief

Sean Kilcarr is a former longtime FleetOwner senior editor who wrote for the publication from 2000 to 2018. He served as editor-in-chief from 2017 to 2018.

 

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!

Sponsored Recommendations

Waiting for a breakdown is costing you. Learn how smart preventive maintenance plans, accurate data, and cross-team coordination can protect your bottom line and boost profits...
Is your fleet ready for California's Clean Truck Check program? Our guide helps you navigate CARB compliance, avoid costly fines, and keep your trucks rolling. Learn how telematics...
Boost truck leasing profits with telematics insights! Reduce maintenance costs, improve uptime, and strengthen customer relationships. Learn how data drives success.
This free guide outlines simple steps for hiring and onboarding commercial drivers while ensuring that you meet Regulation Part 391 and maintain fully compliant driver qualification...