Photo: Cenex

How to keep high-mileage fleet vehicles on the road

April 1, 2019
Although many OEMs still allow the continued use of CJ-4, experts recommend heavy-duty fleet owners switch to the enhanced CK-4 category to protect their diesel engines.

Even when everything is running smoothly, maintaining a fleet of high life-cycle heavy-duty trucks is no easy or inexpensive task. However, with the API category change from CJ-4 to CK-4, high life-cycle heavy duty rigs using CK-4 oils can stay on the road longer by reducing the amount of costly downtime, extending oil drains and, most importantly, enhancing fuel economy.  

The CK-4 difference

Although many OEMs still allow the continued use of CJ-4, experts recommend heavy-duty fleet owners switch to the enhanced CK-4 category to protect their diesel engines. These API engine oil categories, CJ-4 and CK-4, differ in their performance attributes, which contribute to a vehicle’s overall fuel economy and operating capacity. In fact, API CK-4 oils must pass two additional new engine tests that are not part of the previous CJ-4 engine testing sequence.  The advanced technology in CK-4 oils are specifically formulated to protect against oxidation, engine wear, viscosity loss — as a result of shear — and degradation caused by high operating temperatures. Oxidation leads to sludge, and sludge leads to engine difficulties.

Benefits to your high-life rigs and bottom line

Full synthetic lubricants can be an investment, but by using a CK-4 category oil you can see an improvement in your equipment and a significant return on investment down the road. Thanks to their highly synthetic refined base oils and advanced additive technologies, CK-4 synthetic oils stand up better to drastic thermal changes, oxidation and oil aeration. Because of this, using full synthetic or synthetic blend CK-4 fluids means fewer oil changes and less wear and tear on your engine during those long duty cycles. By protecting your engine from abrasion and increasing fuel economy, CK-4 lubricants ensure your rig stays on the road longer for less expense.

Use the right product

Maxtron Enviro-Edge is a full synthetic diesel engine oil engineered to improve fuel economy up to 1.2%; control soot, engine deposits and provide a high TBN, thus ensuring your rig is taken care of and performing at maximum capacity. Equipped with Wear Saver Technology, Maxtron Enviro-Edge protects newer low-emission engines and is uniquely formulated to provide additional protection above and beyond the protection provided by API CJ-4 service category oils for older engines with high-life mileage. For more information and to calculate your commercial fleet savings by switching to Maxtron Enviro-Edge, visit

Test your oil with used oil analysis

Even with increased oil drains and premium product protection, it is important to keep an eye on engine and equipment performance by performing a used oil analysis regularly. A used oil analysis will tell you exactly how your engine is wearing and help you spot potential problems before they lead to unexpected downtime. Getting a used oil analysis every 15,000 miles is a good rule of thumb, but an analysis should be conducted no less than every time you get your oil drained

Keeping rigs on the road is important for your bottom line. Using CK-4 oils can help you maximize your fleet’s efficiency and extend the life of your engine regardless the age of your fleet. For more information, visit and see how much you could save by switching to CK-4.

Sponsored Recommendations

Heavy-Duty Maintenance Checklist

A maintenance checklist can help ensure you hit everything necessary during an inspection. Check out our free downloadable checklist to help streamline your repairs.

Five Ways a Little Data Can Save Your Company Millions

While most trucking and logistics companies rely on cellular to keep their work fleet connected, satellite has the ability to connect anywhere and through small data transmission...

Fleet Case Study: 15% YOY Growth for ITDS

Learn how this small trucking company scaled significantly and maintained outstanding customer service without adding additional people. Sylectus TMS can automate operations and...

Unlocking Fleet Safety & Efficiency: The Managed Service Advantage

Want to boost your fleet's safety and efficiency? Tune in now to discover the power of Managed Services in optimizing your safety program, streamlining operations, and making ...

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!