Workhorse rolls out new walk-in

March 9, 2007
Workhorse Custom Chassis launched a new walk-in truck this week at the Work Truck Show of the National Truck Equipment Assn., dubbed thee W62

INDIANAPOLIS. Workhorse Custom Chassis launched a new walk-in truck this week here at the Work Truck Show of the National Truck Equipment Assn. Dubbed thee W62, the new truck –with chassis by Workhorse and body by either Morgan Olson or Utilimaster-- extends the capacity of the Workhorse walk-in lineup with 19,500-lb and 23,500-lb. GVWR models.

According to Jay Sandler vp of commercial products for Workhorse, the W62 will initially be offered with a GM Vortec 8.1-liter V8 gasoline engine mated to a five-speed Allison 1000HS (for 19,500 lb. GVWR) or Allison 2200HS (for 23,500 lb. GVWR) transmission. The big block Vortec produces 310 horsepower and 455 lb.-ft. of torque. Sandler stated that Workhorse is the only chassis manufacturer to power a gas walk-in at these GVWRs. And by mid-summer, the W62 will also be available powered by an International MaxxForce 5 V6 diesel engine.

“We’re very excited about these new choices in the heavier-duty segment of walk-in truck use,” he said. “It puts us in what we see as a growing segment of the walk-in market. For truck owners, it provides another choice to help them achieve the best fit for their needs.”

Sandler noted that, with the higher cost of diesel fuel, and ’07 emissions compliant diesel engines, fleets are taking a new look at gas engines. “Modern gas engines are no longer that far behind diesels in terms of longevity and maintenance. They are emissions compliant everywhere. They’re less expensive and they weigh less, so you have more payload capacity. If you’re putting less than 25,000 miles a year on the truck, and particularly if it sits for stretches at job sites, gas is a viable option, even for those with higher GVWR needs.”

He pointed out that with the addition of the W62, Workhorse has “far and away the broadest lineup of walk-in trucks of any manufacturer.” Once the diesel W62 is available, Workhorse will offer both gas and diesel choices for GVWRs ranging from 9,400 lbs. to 23,500 lbs., with wheelbases from 125 in to 218 in. The W62 comes with wheelbases of 157, 178, 190, 208 and 218 in.

The W62 incorporates a number of features developed for the Workhorse W42 k, which was launched two years ago and covers GVWRs from 9,400 to 16,000 lbs. These features include:

  • Meritor Quadraulic brakes — four wheel disc brakes with four pistons at each caliper. The braking system also includes Wabco 4-channel ABS system with full J-1939 diagnostic capability.
  • Standard 225/70 19.5-in tires with a 245/70 19.5-in option on steel wheels in black, gray or white. Mud/snow treads are also an option for the rear tires.
  • Two-leaf parabolic springs coupled with premium gas shock absorbers. “These springs provide a very good ride quality and at the same time contribute to a lighter chassis and more payload capacity,” said Sandler.
  • ZF Servocom 8095 variable ratio power steering.
  • Instrument cluster with truck “info center;” tilt steering column and custom 15.5-in steering wheel (18-in optional); cruise control, and brake/transmission/shift interlock. A remote shift gear is mounted on the dashboard, as is the ignition keyhole.

“The 8.1 liter Vortec with the Allison transmission is a powerful performance package for this classification,” added Sandler. “With these kind of choices now available, we think we can better serve current walk-in users and also encourage potential customers to take a new look at what our walk-in truck can do for them.”

For more information, go to

Sponsored Recommendations

Reducing CSA Violations & Increasing Safety With Advanced Trailer Telematics

Keep the roads safer with advanced trailer telematics. In this whitepaper, see how you can gain insights that lead to increased safety and reduced roadside incidents—keeping drivers...

80% Fewer Towable Accidents - 10 Key Strategies

After installing grille guards on all of their Class 8 trucks, a major Midwest fleet reported they had reduced their number of towable accidents by 80% post installation – including...

Proactive Fleet Safety: A Guide to Improved Efficiency and Profitability

Each year, carriers lose around 32.6 billion vehicle hours as a result of weather-related congestion. Discover how to shift from reactive to proactive, improve efficiency, and...

Tackling the Tech Shortage: Lessons in Recruiting Talent and Reducing Turnover

Discover innovative strategies for recruiting and retaining tech talent in the trucking industry at our April 16th webinar, where experts will share insights on competitive pay...

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!