A plan for avoiding downtime

Nov. 7, 2016
It starts before the truck ever hits the road

For most fleets, downtime is a four-letter word. They want to avoid it at all costs and while there is no way to eliminate 100% of it, you can reduce the chances of it happening.

Avoiding downtime starts before the truck ever hits the road. It actually begins in the specification process. Before you order your next truck, review your current operation. Have there been changes in the types of loads you carry and the routes you travel? If so, the way your trucks currently are spec’d may no longer fit the way your trucks actually are operating. You may have to adjust specs to meet your new reality.

You also should spend time reviewing the service histories of your current trucks. Look for component failure trends to see which components are not giving you the durability you need. At the same time, look into new products that have come on the market since the last time you ordered trucks. You may find that some of the newer products will work well in your operation.

It is important to do a complete spec review prior to ordering a new truck. Get your truck supplier’s insight into what components and systems have shown longevity in operations similar to yours.

Once you have a properly spec’d truck, it needs to be maintained properly throughout its life. Use the manufacturer’s published maintenance schedules as a starting point. Tweak schedules as needed for your operation but never exceed the intervals recommended by the OEM. Seeing the truck more often might make sense for you; seeing it less often than recommended could not only cause more downtime but could also void the warranty.

Track all maintenance and service events. Look at data that falls outside normal parameters. Remember the ultimate goal is to PM a truck and never see it in the shop again until it is time for the next scheduled PM service. If you track service events between PMs, you’ll get good guidance on when it makes sense to retire an asset.

Reducing downtime starts with the right specs, followed by the right amount of maintenance, using the information you have at hand to make the right asset retirement decision. It’s as simple as that.

About the Author

Jane Clark | Senior VP of Operations

Jane Clark is the senior vice president of operations for NationaLease. Prior to joining NationaLease, Jane served as the area vice president for Randstad, one of the nation’s largest recruitment agencies, and before that, she served in management posts with QPS Companies, Pro Staff, and Manpower, Inc.

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!

Sponsored Recommendations

The Road Ahead: 2025 Trucking and Fleet Insights

Discover how fleet operators are impacted by challenges like driver onboarding delays and complex compliance, and the critical need for technology to boost efficiency and cut ...

Driving Growth: How to Manage More Freight

Ready to grow your trucking business? Whether you have 25 or 200 trucks, this guide offers practical tips and success stories to help you expand with confidence. Discover how ...

How to Maximize Fleet Management with Vehicle Bypass

Join us on February 18th to learn how truck weigh station bypass systems boost fleet performance and driver satisfaction.

Optimizing your fleet safety program using AI

Learn how AI supports fleet safety programs with tools for compliance monitoring, driver coaching and incident analysis to reduce risks and improve efficiency.