Fleetowner Com Sites Fleetowner com Files Uploads 2014 04 Axle Prod 06712

Re-shoring getting more attention by the day

April 9, 2014
It’s more than a bit self-serving study, the Where in the World report compiled by the Entrada Group, as it’s a company that helps international manufacturers transition their operations to Mexico. Still, this poll provides some interesting insight as to why a goodly number of small- and mid-size manufacturing executives are now ranking the U.S. and Mexico as “prime locations” for lower-cost production of goods bound for North America.

First a little background. Conducted by Mach Media, by Entrada, this single-blind survey – completed in early 2014 – found that 95% of its respondents are from companies headquartered in “mature” markets (73% from U.S., 14% from Canada and 8% from Europe), with nearly seven out of ten respondents (69%) leading companies with less than 500 employees, and 95% of respondents coming from companies that manufacture goods for the North American market.

Yet by a margin of over four to one, those executives – with 62% of respondents at the VP level or higher in their companies – rank the U.S. and Mexico ahead of China now as top “low-cost” manufacturing locations.

“With labor costs rising in the Far East, it isn’t surprising that companies are considering production locations in their own backyard,” noted Doug Donahue, Entrada’s principal and VP-business development, within the report.

“Additionally, for the past decade or so, manufacturers have seen increased pressure to produce in the same region where their product is sold. Thus, for many manufacturers, the U.S. is becoming more attractive due to rising costs in China coupled with this trend of regionalization,” he explained.

[The Wharton School within the University of Pennsylvania compiled an interesting video delving in greater detail into some of future trends surrounding such “re-shoring” activity.]

Donahue added that Mexico represents in his words “the best of both worlds” as it gives companies proximity to U.S. and Canadian markets, coupled with fully fringed labor costs that can be as low as $1.50 per hour.

“This is competitive with hourly labor in much of China, but minus the huge import costs and other range of issues that make manufacturers wary of producing there," he added – not the least of which are long and often complex supply chain networks.

[The Wharton School touched on supply chain complexity as one of the reasons why “re-shoring” is becoming more attractive in the view of many manufacturers.]

Here are some other findings from Estrada’s survey:

  • Proximity is appealing — While the U.S. is the most attractive low-cost manufacturing location among all respondents (at 33%), it’s worth noting that among respondents from companies that already manufacture in two or more locations (their headquarters plus one), Mexico and the U.S. tied as the top choice, each with 23% of the response.
  • Experience with expansion matters — Respondents from companies that currently manufacture at two or more locations revealed a greater appetite for future expansion to a low cost location or locations, when compared to firms producing solely at their headquarters. Of companies that manufacture in two or more places, 67% said they plan additional expansion in the future, compared to just 33% of single-location manufacturers that plan future expansion.
  • Quality and the bottom line both count — While respondents overall rank high-quality production as the most important factor when choosing a manufacturing destination, low operating costs was tops among companies when reflecting on motivation for past expansion, by more than two-to-one over high-quality production.  
  • Cost savings are not always realized — Companies that expanded to a “low-cost manufacturing location” achieved their goals to a large extent just half of the time, with half realizing just moderate savings or worse.
  • Today China is the most common low-cost location, followed by Mexico — More than half of survey respondents (51%) currently manufacture product in China, with 35% manufacturing in Mexico, the second-greatest response.
  • China, Mexico not “either-or” — Out of firms that manufacture product in China, 40% also produce in Mexico. Indeed, for many manufacturers, a presence in both countries makes sense for delivery to regional markets.

Perhaps the biggest “takeaway” from this particular study is that while re-shoring is by no means a “slam dunk” strategy for manufacturers, its compelling qualities are getting more and more attention from them at the very least – and that could certainly bode well for domestic freight demand if more such relocations occur in the months and years ahead.

About the Author

Sean Kilcarr 1 | Senior Editor

Sponsored Recommendations

Reducing CSA Violations & Increasing Safety With Advanced Trailer Telematics

Keep the roads safer with advanced trailer telematics. In this whitepaper, see how you can gain insights that lead to increased safety and reduced roadside incidents—keeping drivers...

80% Fewer Towable Accidents - 10 Key Strategies

After installing grille guards on all of their Class 8 trucks, a major Midwest fleet reported they had reduced their number of towable accidents by 80% post installation – including...

Proactive Fleet Safety: A Guide to Improved Efficiency and Profitability

Each year, carriers lose around 32.6 billion vehicle hours as a result of weather-related congestion. Discover how to shift from reactive to proactive, improve efficiency, and...

Tackling the Tech Shortage: Lessons in Recruiting Talent and Reducing Turnover

Discover innovative strategies for recruiting and retaining tech talent in the trucking industry during this informative webinar, where experts will share insights on competitive...

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!