Mack promotes safety with adaptive cruise control

Mack Trucks introduced a new safety system that helps prevent accidents by maintaining a safe vehicle following distance through the use of proactive braking and driver alerts. The Mack Road Stability Advantage (RSA) by Bendix (RSA) with Adaptive Cruise Control (ACC) helps avoid collisions by integrating throttle, engine brake, and foundation brakes into the cruise control function.

When the cruise control is on, the Mack RSA with ACC not only alerts the driver when the distance to the vehicle in front changes, it also takes action to maintain a safe following distance at the new speed.

The new system uses a radar sensor mounted behind the front bumper to identify and track moving objects in front of the truck. Once the driver turns the cruise control on and sets the speed, ACC works to maintain a set time gap behind the vehicle in front. Indicators are integrated into the dash, so there are no extra displays to distract the driver.

If the vehicle ahead slows and the time gap starts to decrease, ACC will, in sequence, reduce throttle to the engine, apply the engine brake and, finally, apply the foundation brakes.

The system applies about one-third of foundation brake capacity, which means the driver always has the capability to apply full braking force.

The default time gap is 2.8 seconds, which equals 246 feet at 60 mph. Drivers have the ability to set other time gaps with an optional distance switch.

Once the vehicle ahead increases speed and resumes a safe distance, ACC automatically resumes its set speed.

Mack RSA with ACC provides several distinctive types of audible alerts to the driver, including for decreased following distance and close cut-ins by other vehicles (such as when another vehicle changes lanes too close to the front of the truck), plus an impact alert. The following distance and close cut-in alerts are always active, even with cruise control turned off.

The zone for the cut-in alert is approximately 20 feet in front of the truck.

Since ACC builds on the Mack RSA platform, full stability control is always active, which provides stability interventions as needed.

Customers can order the system now for trucks that will enter production in the third quarter of 2009.