Heavy-duty truck engine quality improves

Sept. 7, 2011
Heavy-duty truck engine quality has improved from 2010, after technology changes related to emissions standards revisions caused a spike in engine-related problems during recent years, according to the recent J D Power and Associates 2011 US Heavy-Duty Truck Engine and Transmission Study

Heavy-duty truck engine quality has improved from 2010, after technology changes related to emissions standards revisions caused a spike in engine-related problems during recent years, according to the recent J D Power and Associates 2011 US Heavy-Duty Truck Engine and Transmission Study.

Now in its 14th year, the study measures satisfaction among primary maintainers with engines and transmissions in heavy-duty (Class 8) trucks that are one model-year old. Satisfaction is measured based on eight factors: engine reliability and dependability; engine warranty; acceleration when fully loaded; electronic control module; accessibility to components for service or maintenance; vibration at idle; maintaining speeds on grades; and average fuel economy.

The 2011 study finds that 42% of owners of heavy-duty truck engines that are one model-year old report experiencing some type of engine-related problem, down from 46% in 2010. However, this is still well above the historically low average in 2004, when 26% of owners of truck engines that were two model-years old reported experiencing a problem. This low problem incidence level occurred prior to implementation of two rounds of emissions standards revisions.

The most-commonly reported engine problems are issues with the exhaust gas recirculation (EGR) valve (cited by 23% of owners) and electronic control module calibration (21%).

Also in 2011, engine problems have decreased to an average of 66 problems per 100 vehicles (PP100) from 72 PP100 in 2010. As a result, satisfaction with engines has increased by 22 points to an average of 739 (on a 1,000-point scale).

“It’s encouraging to see that the number and frequency of problems is improving,” said Brent Gruber, senior manager of the commercial vehicle practice at J D Power and Associates. “With the new technology required to meet emissions standards, today’s engines simply are more problematic than the previous generation. So while it’s possible that manufacturers can continue to improve the quality of the engines, it’s unlikely that they’ll quickly get back to the pre-2004 levels.”

He said the most recent emissions standards revision took place in 2010. How those changes will affect quality and customer satisfaction will be reflected in the 2012 J D Power study.

“Given the quality issues that arose from new emissions requirements in 2004 and 2007, the 2010 emissions standards will likely create another round of challenges for engine manufacturers,” said Gruber. “The manufacturers that best handle the integration of these new standards will have a distinct competitive advantage.”

Upcoming emissions and fuel efficiency standards recently announced by the US government will put additional pressure on engine manufacturers for the next several years, he said.

“Although engine manufacturers are facing yet another mandate, we expect that the change in improved fuel efficiency will result in higher satisfaction and loyalty for the engine brands,” said Gruber.

The study finds that, among owners who report average fuel consumption of 5.0 to 5.9 miles per gallon, satisfaction with fuel economy averages 5.9 on a 10-point scale, and 58% of these owners indicate that they “definitely will” or “probably will” specify the same engine brand in their next heavy-duty truck. However, among owners who report an average fuel consumption of six miles per gallon or more, satisfaction with fuel economy increases to 7.1 and intended engine loyalty increases to 66%.

Navistar’s International MaxxForce engines rank highest in customer satisfaction with a score of 760 and perform particularly well in four of eight factors: engine reliability and dependability, engine warranty, vibration at idle, and average fuel economy.

Overall satisfaction with heavy-duty truck transmissions averages 820 in 2011, up two points from 2010. Although transmissions are typically not problematic during the first year of ownership, satisfaction among owners who experience at least one transmission-related problem averages 123 index points lower than among owners who did not experience problems (829 vs 706).

Although they represent less than one-third of all transmissions, satisfaction with fully automatic transmissions is higher, on average, than satisfaction with more prevalent manual transmissions (824 vs 819).

The 2011 study is based on the responses of 1,651 primary maintainers of Class 8 heavy-duty trucks that are one model-year-old. The study was fielded from February to May 2011.

Sponsored Recommendations

Reducing CSA Violations & Increasing Safety With Advanced Trailer Telematics

Keep the roads safer with advanced trailer telematics. In this whitepaper, see how you can gain insights that lead to increased safety and reduced roadside incidents—keeping drivers...

80% Fewer Towable Accidents - 10 Key Strategies

After installing grille guards on all of their Class 8 trucks, a major Midwest fleet reported they had reduced their number of towable accidents by 80% post installation – including...

Proactive Fleet Safety: A Guide to Improved Efficiency and Profitability

Each year, carriers lose around 32.6 billion vehicle hours as a result of weather-related congestion. Discover how to shift from reactive to proactive, improve efficiency, and...

Tackling the Tech Shortage: Lessons in Recruiting Talent and Reducing Turnover

Discover innovative strategies for recruiting and retaining tech talent in the trucking industry at our April 16th webinar, where experts will share insights on competitive pay...

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!