Engine evolution

Aug. 1, 2003
In the event you haven't been keeping up on all of the recent press regarding Class 8 emissions regulations, a brief recap may be helpful. Cummins, Detroit Diesel, Mack and Volvo engines have been in compliance with the Environmental Protection Agency's (EPA) consent decree since October 2002. Caterpillar elected to introduce its emissions-compliant engines this fall. Since Mercedes-Benz was not included

In the event you haven't been keeping up on all of the recent press regarding Class 8 emissions regulations, a brief recap may be helpful.

Cummins, Detroit Diesel, Mack and Volvo engines have been in compliance with the Environmental Protection Agency's (EPA) consent decree since October 2002. Caterpillar elected to introduce its emissions-compliant engines this fall. Since Mercedes-Benz was not included in the EPA settlement, it has until January 1, 2004, to produce engines that will comply with the 2.5-gram NOx standard.

So far this year, more than 32,000 Class 8 trucks with certified and compliant engines have gone into service. From all reports, they are doing great. Reliability expectations are being met, driver acceptance is high, and the fuel economy loss is in line with what engine manufacturers originally predicted. Unfortunately, price hikes were necessary to cover the cost of the new emissions systems.

The October 2002 change caught many fleets by surprise. This was the first time since Class 8 vehicle emissions were first regulated in 1975 that fleets have had to pay directly for the cleaner air mandated by EPA.

Consequently, a lot of attention has recently been focused on EPA's next round of emissions standards, which go into effect in 2007. One might think that it is premature to worry about the next set of emissions rules. However, the lead time required by the engine manufacturers means that decisions about the technology used in the new engines must be finalized by the end of this year.

Two technologies have evolved. One approach builds on the cooled-EGR (Exhaust-Gas Recirculation) technology used by most engine manufacturers to further reduce NOx by 50% in 2007, and adds a particulate filter to achieve the particulate standard, a reduction of 90%.

The second technology utilizes SCR (Selective Catalytic Reduction) to control NOx through the use of an injected fluid called urea. One major issue in choosing this technology is the lack of infrastructure in the U.S. to make urea readily available for fleets to use when filling their tanks. Another concern is EPA enforcement, including the kinds of penalties that might be levied against operators who are running trucks without urea in their tanks.

Manufacturers are evaluating both technologies, as well as others, to develop the lowest cost solution for 2007. Regardless of which technical solution engine makers decide on, fleets want the ability to run the new 2007 engines as early as possible. So engine manufacturers are developing plans to provide field-test units well before the deadline.

NPTC, like other industry associations, has formed an Engine Task Force and is starting to ask detailed questions to help members understand the overall economic impact of the new engine technology on their businesses. The engine manufacturers, through their own association, EMA, are fully cooperating.

It's unlikely that EPA will delay implementation of the '07 emissions rules, so fleets will have no choice but to deal with the resulting economic impact. The good news, however, is that no one has yet ruled out tax incentives for fleets as a way to offset higher costs.

Most would agree that trucking has already done more than any other industry to clean up the air.

Gary Petty is President and CEO of NPTC. His column appears monthly in FLEET OWNER.

About the Author

Gary Petty

Gary Petty has more than three decades of experience as a CEO of national trade associations in the trucking industry. Since 2001, he has served as president and CEO of the National Private Truck Council, the national trade association founded in 1939, representing the private motor carrier industry. Petty is the Private Fleet Editor and columnist for FleetOwner, where he writes monthly articles about successful managers and business models in the private fleet market.

Voice your opinion!

To join the conversation, and become an exclusive member of FleetOwner, create an account today!

Sponsored Recommendations

What challenges are top of mind for fleet professionals in 2025? Get exclusive insights from the 2025 Fleet Trends Survey and discover where the industry is headed next.
The most successful fleets accomplish more than delivering freight. To accomplish this, fleets need a fuel that’s reliable, more economical and more sustainable. That fuel is ...
Are your KPIs driving real fleet improvement? Learn how to set smarter, data-driven benchmarks, track success like top-performing fleets, and apply proven strategies to optimize...
Learn how eets can enhance truck utilization and minimize safety incidents using business intelligence and AI. Delve into innovative practices, technology integration and real...