Green lights for heavy-duty fleets: How signal priority is changing urban delivery economics
Key takeaways
- Freight signal priority can reduce truck stops, fuel consumption, and travel time on congested urban routes.
- Signal timing adjustments may improve delivery reliability and route productivity without adding trucks or extending driver shifts.
- Connected traffic signals can benefit electric and diesel fleets by reducing stops and preserving energy.
Commercial carriers are operating today under an unforgiving cost structure that is putting on the pressure.
The industry average cost of operating a truck reached a record $2.336 per mile in 2025, up 3.4% from the year before, and repair and maintenance costs climbed 8.6%. Meanwhile, truckload and refrigerated margins stayed below 1%.
Rising costs have already forced hard choices, with carriers trimming truck counts by 2.4% and cutting non-driver staffing by 7.8%, leaving little room to absorb further inefficiency. For fleets running dense urban routes, few places concentrate those pressures as sharply as traffic signals.
Why stops cost more than they seem
A loaded delivery truck that stops at a red light must shed momentum and then rebuild it. Each cycle burns fuel, wears brakes and tires, and stresses the transmission. Multiplied across dozens of signals on a single route and hundreds of routes in a fleet, the cumulative cost is substantial.
Urban duty cycles make the problem worse, as short blocks, closely spaced signals, and frequent curbside stops mean trucks rarely settle into a steady speed, so a large share of every mission goes to accelerating and braking rather than cruising. Maintenance budgets reflect this burden, as repair costs were among the fastest-growing line items last year.
Drivers feel it too. Constant stop-and-go driving causes fatigue and erodes schedule reliability, which makes tight delivery windows harder to achieve. A driver who loses minutes at every light must either shorten time at the curb or risk running late; neither choice serves the driver, customer, or carrier.
How signal priority works
Transit signal priority has long helped buses clear intersections by adjusting signal timing. LYT’s Freight Signal Priority (FSP) adapts the same concept for trucks. Using connected vehicle technology, a truck shares its location, which can extend a green phase or shorten a red phase so the vehicle passes without stopping. This differs from emergency vehicle preemption, which overrides the signal.
Priority requests can be configured to meet each agency's operational needs, balancing vehicle priority with cross-street traffic demand before returning to normal signal timing.
traffic congestion
Rising congestion forces fleets to shift to real-time routing and data-driven planningWhat the evidence shows
Results from simulations and field programs point in a consistent direction. One study of connected trucks found that network-wide fuel consumption fell 11.8% under freight signal priority. A North Texas planning program estimates that eliminating 5,000 stops per day can save fleets 3,800 minutes of travel time and $1,500 in fuel and operating costs. An Alabama pilot across 26 intersections recorded travel time reductions of up to 47% for participating trucks without disrupting general traffic.
The simulation also showed that side-street vehicles used more fuel when green time shifted toward the truck corridor, particularly where truck volumes were high. Signal priority is a balancing exercise, not a blanket preference. New super-intelligent solutions can evaluate traffic conditions, anticipate approaching vehicles, and optimize signal timing in real time, helping balance freight movement with the needs of surrounding traffic.
Predictability and productivity
Fuel savings are only part of the value. Delivery commitments depend on consistency, and signal delay is one of the least predictable variables on an urban route. Reducing it narrows the gap between planned and actual arrival times, which supports service level agreements.
In congested metropolitan corridors, recovered minutes also translate into productivity. Drivers can complete more stops within existing hours, improving route throughput without adding trucks or extending shifts. Fewer unplanned delays also let dispatchers build tighter routes with less buffer time. At a time when carriers have been cutting capacity and staff to protect margins, that is a meaningful form of relief.
The electrification connection
Fleets adding battery-electric trucks have a further reason to care. Research from Georgia Tech found that on stop-and-go urban routes, electric delivery trucks were roughly 50% more efficient than diesel equivalents, helped by regenerative braking. Even so, regeneration recovers only part of the energy spent accelerating. Every avoided full stop preserves range, protects uptime between charges, and reduces localized emissions for diesel vehicles still in the fleet.
What comes next for local intersections
Deployments can be moved forward in several practical steps:
Agencies and carriers can begin with corridors that combine high truck volume and chronic delay, where results will be easiest to see and public benefits easiest to justify.
Priority rules should protect cross-street traffic and be tuned using measured outcomes rather than assumptions.
Shared metrics, including stops avoided, fuel used, travel time, and emissions, give both public agencies and fleet managers a common way to judge success.
Fleet managers can also ask whether existing telematics platforms can exchange data with local signal systems and can track stops per mile as a routine operating measure alongside fuel and on-time performance.
A practical lever in a tight market
No single technology resolves the cost pressures facing commercial carriers. Signal priority, however, addresses a problem that fleets have long accepted as unavoidable: the time and energy lost at the intersection. As connected infrastructure expands, cooperation between traffic agencies and fleet operators may prove to be one of the more accessible ways to protect margins, meet delivery commitments, and move freight through crowded cities more cleanly.
About the Author
Tim MenardTim Menard
Timothy Menard is the founder and CEO of Lyt, provider of cloud-based open-architecture smart traffic solutions. Prior to founding Lyt, Menard designed hardware and software simulation systems at Tesla as a firmware engineer.



