Optronics adds ID light bar with integrated utility, scene light

Optronics International recently introduced its new MCL80RCB LED Combination ID Light Bar & Utility Light.

The new lamp enables a vehicle’s light bar to serve double duty as a utility and scene light, whether it’s mounted high or low, the company said.

With a mounting position high on the back of a vehicle, the lamp can illuminate a wide area below and behind it with white LED light. Mounted on trailers where the ID bar is close to the ground, the lamp provides greater visibility and safety with a tighter and more intense beam pattern.

Generally, when working in, on or around the rear end of a vehicle in lowlight conditions, separate utility or work lamps are needed to light the work area. Extra lights require mounting, routing holes, wiring and careful lamp placement so as not to interfere with vehicle operation, doors and personnel.

Using the ID light already required for vehicles measuring 80 inches or more in width as a platform, the MCL80RCB LED Combination ID Light Bar & Utility Light incorporates two seven-diode white LED utility lights. The thin, streamlined body of the lamp measures just 15.5 inches in length, 1.313 inches in width and 0.75 inches in thickness, including its attached, closed-cell foam gasket.

“The LED Combination ID Light Bar & Utility Light offers optimal convenience and minimal complexity for those who must work around the rear of vehicles in darkness,” said Marcus Hester, vice president of sales and marketing for Optronics. “With two utility lights and a standard ID light, our new MCL80RCB is actually three lamps in one.”

The surface-mount, hardwired lamp is easy to install, and its integrated utility lights can be operated with a standard switch, Optronics said. The lamp requires just two fasteners for mounting and one wiring hole with a 0.59-inch diameter.

“During focus groups, we’ve seen significant interest from multiple customer segments,” Hester said. “This lamp can be used anywhere an ID bar is mounted and because that’s usually up high, a customer can use it to light cargo, liftgates and the ground below.”

The company believes it’s a perfect match for vehicles involved in last-mile delivery, particularly during winter months. It’s also expected to be a great fit for any enclosed trailer, including horse trailers, along with a variety of truck van bodies.

The lamp’s lens and housings are made of tough polycarbonate material that is sonically welded. The lamp employs a solid-state, surface-mount device (SMD) design that protects its electronics against moisture, shock and vibration. Like all LED products from Optronics, these lamps come with no-hassle, one-diode lifetime warranty protection that will replace the lamp if even one diode fails.

The MCL80RCB LED Combination ID Light Bar & Utility Light is expected to be in stock and available for shipping in the first quarter of 2021.

For information on international sales and distribution of Optronics products, visit doriandrake.com.